The GARDIA gates are intended for fencing off industrial and residential buildings. They are also used as access control elements around playgrounds, nurseries, allotment gardens, recreational plots, and housing estates.
The GARDIA gates are available in a manually-operated and a power-operated version. The power-operated version is especially recommended for premises where the gate has to be opened and closed frequently. In this case, the automatic drive unit is a very convenient solution. A drive unit integrated with the post is a proven solution. The post protects the drive and the control unit against changeable weather conditions. The post lock secures the drive unit against unauthorized access and enables quick uncoupling of the drive in case of a power outage.
Manually-operated and power-operated GARDIA gates were awarded the CE mark, which confirms their compliance with the provisions of the PN-EN 13241-1 standard for industrial and residential gates.
GARDIA gates are secured against corrosion by hot-dip galvanizing or by a combination of hot-dip galvanizing and coating with polyester paint. Duplex products are covered by our 10-year corrosion protection guarantee.
The GARDIA sliding gate is also available in a manually-operated version fitted with a hook bolt lock. The gate leaf is infilled with the Vega 2D or Vega 2D Super mesh panel welded to the structure.
B-3 installation on a support angle bracket
single lock post 100x100mm with a roller catcher
infill: Vega 2D or Vega 2D Super mesh panel welded to the structure (wire ø 6/5/6 mm or 8/6/8, mesh size 50x200mm)
The combination of zinc and varnish coatings in the DUPLEX system substantially contributes to extending the life of WIŚNIOWSKI fences. Regardless of the weather, you can always be sure that WIŚNIOWSKI fences will keep their appealing look.
The gates are available in a hot-dip galvanized or a galvanized and polyester coated version. The gates are available in the following colours as standard: RAL 6005, RAL 7016, RAL 9005/MAT, hot-dip galvanized
Automatic gates can be fitted with the AWso2019 Pro or BFT Ares ULTRA BT A1500 drive unit. The automatic gate is available with a drive unit integrated with the post closed with a cover or with an external drive unit installed on a rack next to the structural post.
The structural post of the automatic gates is fitted with the WIŚNIOWSKI AWSo2018 Pro drive unit. Depending on the operation method and the required level of safety, the automatic gate is available in the Totmann (key-operated) or Automatic (remotely operated) version
Totmann version – accessories: actuator, central control unit, power supply unit, warning light, face edge of the leaf secured with a rubber profile, key switch with an emergency STOP button.
Automatik 1 version – accessories: actuator, central control unit with an integrated radio receiver, two AW four-channel transmitters, power supply unit, warning light, external antenna, photocells, 8k2 safety edge on the post – 1 piece, face edge of the leaf secured with a rubber profile, key switch with an emergency STOP button.
Automatik 2 version – accessories: actuator, central control unit with an integrated radio receiver, two four-channel transmitters, power supply unit, warning light, external antenna, photocells, 8k2 safety edges on the post – 2 pieces, face edge of the leaf secured with a rubber profile, key switch with an emergency STOP button.