SLIDING GATES

WIŚNIOWSKI industrial sliding gates - smooth and efficient operation

PROVEN TECHNOLOGY AND SIMPLE ASSEMBLY

FUNCTIONALITY AND SAFETY

Ostre zakonczenie — **Anti-climb spikes** in the form of a steel comb that may be mounted on the top edge of a gate leaf.

Element regulacji — **Tensioning device** allows additional levelling to the ground when assembling the gate and correcting the gate position in normal operation.

Zamek do bramy recznej — **Lock to a manually-operated gate** is a solid and durable security device for a manuallyoperated gate, located in the aluminium housing.

Fotokomorki — **Photocells** mounted on the gate posts: if an obstacle appears within the gate opening an infrared beam will break and so the gate stops and reverses.

Bezpieczne sterowanie bramy — **Safe gate control** with a key switch equipped with a safety cut-out switch: turning the key starts opening or closing the gate, while pressing the safety switch stops the gate movement immediately.

Naped umieszczony w slupie — **Drive located in the post** secured against mechanical impact, adverse weather conditions and unauthorised access.

Listwa bezpieczenstwa — **Safety edge** makes the gate stop and reverse on contact with an obstacle. Mounted on the gate-leaf front, on a guiding frame or at the gate end.

System indukcyjny — **Induction system** when the safety bar is pressed, an impulse is sent from the gate leaf to the controller.

Listwy bezpieczenstwa i lampa ostrzegawcza — **Safety edges and warning light** located on the post. Safety bars react to pressure, while the light signals the gate leaf movement each time the gate is activated.

SLIDING GATE PI 200: MANUALLY-OPERATED AND AUTOMATIC

brama przesuwna PI 200 reczna brama przesuwna PI 200 automatczyna niski slupek brama przesuwna PI 200 z napedem

Cantilever sliding gate PI 200 is designed to close a driveway up to 16m wide. Two cantiliver gates (2 x 12 m) allow to close as wide as 24 m driveway.

Main features:

200 x 155 mm ground track,
triple guiding frame in a manually-operated gate,
double receiver post,
balancing back frame to prevent the gate from tilting when fully opened,
power-operated gate with a drive located in the post,
available external drive execution.

SLIDING GATE PI 130: MANUALLY-OPERATED, AUTOMATIC AND AUTOMATIC WITH A SHORT POST

brama przesuwna PI 130 reczna brama przesuwna PI 130 automatczyna niski slupek

Cantilever sliding gate PI 130 is designed to close a driveway up to 9 m wide. Two cantiliver gates (2 x 8m) allow to close as wide as 16 m driveway.

Main features:

130 x 115 mm ground track,
double guiding frame,
double receiver post,
balancing back frame to prevent the gate from tilting when fully opened (depending on the gate width),
power-operated gate with a drive located in the post, closed with a cover,
available external drive or short-post drive executions.

SLIDING GATE PI 95: MANUALLY-OPERATED AND AUTOMATIC

brama przesuwna PI 95 reczna brama przesuwna PI 95 z napedem

Cantilever sliding gate PI 95 is designed to close a driveway up to 7 m wide. Two cantiliver gates (2 x 6 m) allow to close as wide as 12 m driveway.

Main features:

95 x 85mm ground track,
double guiding frame in a manually-operated gate,
single receiver post,
balancing back frame to prevent the gate from tilting when fully opened (depending on the gate width),
power-operated gate with the drive located in the post, closed with a cover,
available external drive execution.

GATES DESIGNS

wypelnienie PI 200 25x25

PI 200 cantilever sliding gate with the 25 x 25 mm closed-section filling welded to the construction – view from inside

wypelnienie PI 200 VEGA B

PI 200 cantilever sliding gate with the VEGA B welded mesh panel screwed to the construction – view from inside

wypelnienie PI 200 vega 2d

PI 200 cantilever sliding gate with the VEGA 2D Super welded mesh panel filling screwed to the construction – view from inside

wypelnienie wspawane PI 200 vega 2d super
PI 200 cantilever sliding gate with the VEGA 2D Super welded mesh panel, welded inside the frame – view from inside

CORROSION PROTECTION

LONGEVITY

All WIŚNIOWSKI fencing system elements are rust-protected with top anticorrosive coating achieved by galvanising and powder painting. It is hot dip galvanising of a chemically cleaned construction that provides dozens of years of rust protection to WIŚNIOWSKI fencing system elements.

EFFICIENT PROTECTION

Galvanising is an efficient economically technique in terms of both production and maintenance. Galvanised fencing by WIŚNIOWSKI does not require surface maintenance for years. Rust-proofing no longer means expensive treatments as with traditional fencing. Galvanised steel may be recycled so it does not litter or burden the environment.

DUPLEX SYSTEM – DOUBLE PROTECTION

Combined galvanised and varnish coatings in the DUPLEX system make WIŚNIOWSKI fencing serve considerably longer. In all weather conditions WIŚNIOWSKI fencing will look attractive. RAL colour palette application makes a selection of polyester coating colour easy.

PROOFED IN EVERY CONDITIONS

Galvanising by WIŚNIOWSKI complies with the European norm PN-EN ISO 1461 which guarantees proper quality of galvanised products. Galvanised coating is resistant to both high and low temperatures and UV radiation for best protection of steel surfaces.

INFORMATION

COLOURS

COLOUR RANGE

5010 niebieski — Gentian Blue | RAL 5010

6005 ciemnozielony — Moos Green | RAL 6005

7016 antracyt — Anthracite Grey | RAL 7016

For Clients who look for non-standard colours, we prepared the offer of 200 RAL colours for powder coating. ralownik wisniowski