MakroPro 100 2.0 series

Combining the highest quality with solutions for maximum durability.

The most advanced and ultra-durable type of doors from the MakroPro series. We cannot imagine a door of this class could be operated manually, which is why the MakroPro 100 2.0 is automated as standard.

Traditional springs were replaced with a state-of-the-art drive system with a guarantee of at least 100,000 cycles as standard! It is an enterprise-class solution characterized by stability and reliability.

Sectional doors

ThermoSet™ as standard

The ThermoSet™ thermal insulation kit enhances the door’s tightness and makes it possible to considerably limit energy losses in the building. It is standard in the MakroPro 2.0 series doors, which makes them stand out from typical solutions.

Maximum durability

Thanks to the use of a unique drive system, the MakroPro 100 2.0 door guarantees reliability over 100,000 cycles! One cycle includes one opening and closing – which means that the door will function problem-free for long decades!

A well-thought-out installation system

The MakroPro 2.0 doors were designed so as to limit the time needed for installation and servicing as much as possible. Details such as: load-bearing cable adjustment, spring-free balancing system, the 1,000 [mm] mark, “click” type seals, adjustable guides, double fixing holes or crossbar with a gauge function all minimize the risk of mistakes and shorten the installation time.

Characteristics and features

Each element of the MakroPro 100 2.0 door series was designed with utmost attention to detail, all the while bearing in mind that the ready product will have to face tough requirements. The technological solutions that we used are unique throughout the market and ensure a high degree of safety and durability of the entire design, as well as easy fitting and servicing.

Side gasket

The warm, four-chamber, hard and soft side gasket is a state-of-the-art solution. On the one hand, thanks to the use of a double lip and three-chamber construction, it effectively eliminates thermal bridges, while on the other, it ensures a safe distance between the lintel and the door curtain. The MakroPro 2.0 doors are fitted with warm side gaskets as standard.

Top gasket

The warm, elongated, two-lip top gasket ensures double sealing in the top section of the door.

Corner gasket

The solution enables maximum sealing of the top corners of the door – the area where the side gaskets join the top gasket.

Tracks

The tracks are made of 2 [mm] thick sheet. A thicker wall in combination with the modified shape (additional forming) is even more effective in preventing guiding rollers from derailing and considerably improves the stabilization of the door track system.

Opening frames

Fitted with an additional wall that prevents side gaskets from working their way out and reinforces the opening frame. This stabilizes the entire door track system to ensure reliable operation.

Double installation fixing holes

The openings (fixing holes where anchors are installed) are cut out in pairs. This is convenient whenever fitting problems arise, e.g when the drill hits a rebar while holes are being drilled.

Tracks screw-assembled with the opening frame

The connection is provided using mounting plates. With this solution, the offset of the vertical tracks (fixing hole adjustment) from the wall can be modified. This makes it possible to replace just the tracks. The tracks are screwed down with the opening frames at the factory.

The 1,000 mark

A mark – an arrow – is placed 1,000 [mm] from the base of the vertical frames. This makes it possible to accurately find the proper height for fitting the opening frames.

Open structure of the mounting elements

The mounting, safety, and support plates of the drive elements of the shaft now have an open structure. This solution enables quicker and easier installation, replacement, and servicing of door drive elements.

100,000 cycles

Because we replaced traditional springs with a modern drive unit, our garage door can perform an increased number of cycles. With 10 cycles per day, this amounts to 27 years of use!

Quiet guiding rollers

The rear crossbar is made of 2 [mm] thick sheet. Together with sheet angle bars, it forms a robust stabilizing element. It is also used as a frame gauge that helps to properly and quickly determine the spacing of the opening frames of the door during fitting.

Rear crossbar

With the design of the brake safeguarding against the effects of load-bearing cables breakage (the brake is integrated with the catching element), the entire safeguard mechanism is built-in in the door structure.

Safeguard preventing the door from being prised open

The brackets can be used instead of the standard clamp in the middle of the horizontal track. The solution makes it possible to bypass a lintel beam, for example.

Adjusted suspension bar brackets

The special horizontal track layout (cascade) provides increased strength and stabilizes the structure.

Cascade track layout

The larger holders of the guiding rollers are equipped with special bushes made of self-lubricating plastic. With this solution, door operation became considerably smoother, because the structural vibrations are silenced and attenuated.

MakroPro 100 2.0 series

MakroPro 100 2.0

The MakroPro 100 2.0 doors are made of 40 [mm] thick warm steel panels infilled with polyurethane foam.

- Guaranteed number of cycles: 100,000.
- SI series GfA electric drive unit as standard.
- The standard accessories include the ThermoSet™ gasket kit: four-chamber, double-lip thermal side gaskets; double-lip top gasket; corner gaskets.
- Panel heat transfer coefficient Up=0.48 [W/m²xK].
- Thickness of the opening frame 2 [mm] / guide 2 [mm].
- Quiet guiding rollers with a bush fitting.
- Panel side covers in door leaf colour.
- Double safety device for tracks preventing guiding rollers from derailing.
- Protection: cable break safety device (2 pcs.).
- Watertightness class 3.
- Wind load resistance class 3.
- Air permeability class 4.
- Sound insulation Rw=23/24 [dB] (without a wicket door / with a wicket door).
- Reaction to fire NFP: B, s2, d0.

MakroPro 100 2.0 series

MakroPro 100 ALU 2.0

The doors are made of 40 [mm] thick aluminium panels without a thermal break, infilled with acrylic glazing. Steel bottom panel.

- Guaranteed number of cycles: 100,000.
- SI series GfA electric drive unit.
- The standard accessories include the ThermoSet™ gasket kit: four-chamber, double-lip thermal side gaskets; double-lip top gasket; corner gaskets.
- Heat transfer coefficient – as provided on the door nameplate.
- Protection: cable break safety device (2 pcs.). - Thickness of the opening frame 2 [mm] / guide 2 [mm]. - Quiet guiding rollers with a bush fitting. - Double safety device for tracks preventing guiding rollers from derailing.
- Watertightness class 2.
- Wind load resistance class 3.
- Wind load resistance class 4 (for doors with reinforcement).
- Air permeability 4.
- Sound insulation Rw=23/24 [dB] (without a wicket door / with a wicket door).

Colour scheme

Do you prefer classic style? Or are you planning to choose something unobvious? Our colour and film coating palette gives you almost unlimited possibilities.