GARAGE DOORS Intended use: The roller garage door is intended for use in private buildings and utility rooms. The door curtain is made of aluminium profiles filled with freon-free polyurethane foam. The curtain is rolled onto a steel winding shaft located near the lintel inside the room. Aluminium vertical tracks, powder coated. As standard, the door is fitted with an electric drive unit, an internal pushbutton switch, and an external key switch, as well as an emergency opening crank. The door is installed behind the opening as standard (inside the room); when a special version is ordered, it can also be installed in front of the opening (outside the room). SAVES SPACE A perfect solution for buildings where space is of essence or where ceiling tracks cannot be installed. Once the door curtain is wound on the shaft, it takes up very little space just behind the lintel. This provides free area under the ceiling and on the sides. PROTECTION AGAINST CORROSION The door curtain and tracks are made of aluminium, whose excellent technical parameters and resistance to weather outmatch other materials. SAFETY Each roller door is fitted with a safety brake. It serves as an auxiliary protective device which prevents the door curtain from inadvertently dropping. ROLLER DOORS BR-77E | BR-77s2 | ROLLER GARAGE DOORS BR-77s | BR-77E TECHNICAL DATA SHEET ROLLER GARAGE DOORS BR-77s | BR-77E 19 [mm] 77 [mm] STRUCTURE DOOR CURTAIN Door curtain The door curtain is made of aluminium profiles infilled with freon-free polyurethane foam (this does not apply to the bottom profile). Our very own production line for manufacturing profiles ensures full quality control. Special design solutions, such as distance brackets installed at the ends of the profiles, which prevent door profiles from separating and prevent scratching, ensure a long life. The profiles are provided with a highly wear-resistant coating. The door curtain is fitted with a reinforced aluminium bottom profile, which provides increased rigidity of the door. A three- chamber seal is installed on the bottom profile. 2 2 4 55 6 7 1 Bottom section 85 [mm] 120 [mm] A Aluminium profile Gasket 3 The curtain lock in the BR-77s and BR-77E door curtain prevents the curtain from being lifted from the outside. Safety of use is ensured by the safety edge. If a curtain collides with an obstacle, it retracts to an open position. Distance brackets ensure proper clearance between the profiles when the door curtain is wound to allow quiet operation of the door and to extend the life of the panels. Emergency opening of the door from the inside is possible thanks to the emergency opening crank. Crank output through a wall – if no other entrance is available to the room where the roller door is installed, an option which allows the crank to be output through the lintel to the outside of the entrance opening should be ordered. Please provide wall thickness when placing your order. AW 77 section is a light aluminium profile infilled with freon-free polyurethane foam. Aluminium tracks (without a thermal break) are fixed inside the room along the side edges of the opening. They are fitted with brush gaskets and slides. The door curtain is fitted with a reinforced aluminium bottom profile, which increases the rigidity of the curtain. 1 2 3 4 5 6 7 77E77sROLLER GARAGE DOORS BR-77s | BR-77E | 3 TECHNICAL DATA SHEET ROLLER GARAGE DOORS BR-77s | BR-77E BR-77s | BR-77E DOOR BR-77s | BR-77E DOOR (example glazing) BR-77s | BR-77E DOOR with a ventilated profile DOOR DESIGNS COLOURS Light Blue | RAL 5012 Graphite | RAL 7016 Pebble Grey | RAL 7040 Green | RAL 6005 Golden Oak Wood imitating colours Dark Oak Light brown | RAL 8014 Fir green | RAL 6009 Dark brown | RAL 8019 Silver | RAL 9006 Grey | RAL 7038 Black | RAL 9005 White | RAL 9010 Red | RAL 3003 Standard colours of door made up of AW 77 profiles In response to the needs and ideas of individual customers who expect a durable, appealing, and original look, we offer a wide range of colours. This allows the customer to match the door colour to the façade, windows, and finishing elements of the building. For our customers looking for garage doors in unique colours, we offer powder coating in over 200 RAL palette colours.4 | ROLLER GARAGE DOORS BR-77s | BR-77E TECHNICAL DATA SHEET ROLLER GARAGE DOORS BR-77s | BR-77E BR-77 s ROLLER DOOR The door is fitted with a winding shaft cover around the circumference of the shaft. BR-77 E ROLLER DOOR The door is fitted with a partial winding shaft cover (front) WINDING SHAFT COVER TYPESROLLER GARAGE DOORS BR-77s | BR-77E | 5 TECHNICAL DATA SHEET ROLLER GARAGE DOORS BR-77s | BR-77E So – opening width, ordering dimension, Sj – clear passage width after door installation, Ho – opening height, ordering dimension, Hj – clear passage height after door installation, N – minimum required lintel height, W 1 – minimum required side clearance, W 2 – minimum required side clearance, E – minimum room depth with clearance under the ceiling. BR-77EBR-77s SjSoSo Hj (1) Ho – 130 [mm] Ho – 140 [mm] Hj (2) Ho – 170 [mm] Ho – 140 [mm] Nmin = 180 [mm] for Ho = 2,100 [mm] = 250 [mm] for Ho = 2,250 [mm] = 285 [mm] for Ho ≤ 2,700 [mm] = 300 [mm] for Ho ≤ 2,700 [mm] = 370 [mm] for Ho > 2,700 [mm] = 370 [mm] with a SIK drive unit W1min, W2min 100 [mm] 110 [mm] = 400 [mm] with a SIK drive unit on the drive side EminNmin + 200 [mm]Nmin + 200 [mm] Tab. 1. Installation parameters – standard version INSTALLATION DIMENSIONS / Opening height (3) (Ho) in [mm] up to Opening width (3) (So) in [mm] up to 1,5001,600 1,70 0 1,8001,900 2, 000 2, 100 2, 200 2, 300 2, 400 2,5002, 600 2, 700 2,8002,9003, 000 3, 100 3, 200 3, 300 3, 400 3,5003, 600 3, 700 3,8003,9004, 000 4, 100 4, 200 4, 300 1,700 1,800 1,900 2,000 2,100 2,200 2,300 2,400 2,500 2,600 2,700 2,750 2,850 2,950 3,050 3,100 3,150 / / / / / / / / 3,250 / / / / / / / / 3,350 / / / / / / / / 3,450 / / / / / / / / 3,550 / / / / / / / / 3,650 / / / / / / / / 3,750 / / / / / / / / 3,850 / / / / / / / / 3,950 / / / / / / / / 4,050 / / / / / / / / 4,150 / / / / / / / / Opening height (3) (Ho) in [mm] up to Opening width (3) (So) in [mm] up to 1,5001,6001,7001,8001,9002,0002,1002,2002,3002,4002,5002,6002,7002,800 1,700 1,800 1,900 2,000 2,100 2,200 2,300 2,400 2,500 2,600 2,700 (1) – Garage door in the Totmann version (2) – Garage door in the Automatik version (for BR-77s garage doors with the “Outdoor installation option”, it is not possible to achieve a full clear opening.). (3) – Ordering dimensions DIMENSIONAL RANGE FOR BR–77s DIMENSIONAL RANGE FOR BR–77E dimensional range for GFA SIK flange-mounted drives the possibility of manufacturing garage doors within this range should be consulted with the Sales Department garage doors with a tubular drive (standard version) / garage doors with a tubular drive (standard version)6 | ROLLER GARAGE DOORS BR-77s | BR-77E TECHNICAL DATA SHEET ROLLER GARAGE DOORS BR-77s | BR-77E OPTIONAL ACCESSORIES Operates the door after an individual access code is provided. Can be installed outside and inside. Warning function. Orange blinking light indicates that the door is operating. CODE LOCKSIGNAL LIGHT If an obstacle appears in the clear passage, the infrared beam is interrupted, the door stops and returns to the open position. PHOTOCELLS Makes it possible to control the drive units of other manufacturers using the Pulsar transmitter. It is a two-channel device which makes it possible to program as many as 32 transmitters. EXTERNAL RADIO RECEIVER Makes it possible to lock the door from both sides. Deadbolts are made of steel galvanized bars connected to the lock with rods (installed inside the bottom profile). LOCK 3-channel transmitter makes it possible to control drive units and radio receivers. The wall-mounted transmitter is a wireless flush-mounted device which does not require any cables. 3CH io WALL-MOUNTED TRANSMITTER The switch requires a key for the door to operate. Recommended where access must always be controlled. EXTERNAL KEY SWITCH Makes it possible to control the io radio drives and can support up to two devices. It is a surface-mounted wireless device, installation does not require any cables. KEYPAD 2 io The Rollixo central control unit allows roller garage doors to be integrated into a smart home management system based on the TaHoma switch central control unit. This enables the use of additional accessories such as remote transmitters, a code keypad, wall- mounted transmitters, and other compatible devices. Rollixo SMART io CONTROL UNIT Four-channel remote control. Enables wire- less control of drive units via the io radio transmission. Operates at a frequency of 868 MHz and enables control of up to four differ- ent drive units. FOUR-CHANNEL TRANSMITTER PULSAR io Two-channel remote control. Enables wireless control of drive units via the io radio transmis- sion. Operates at a frequency of 868 MHz and enables control of two different drive units. TWO-CHANNEL TRANSMITTER PULSAR ioROLLER GARAGE DOORS BR-77s | BR-77E | 7 TECHNICAL DATA SHEET ROLLER GARAGE DOORS BR-77s | BR-77E Compatible with the WIŚNIOWSKI 868 MHz radio receiver. Control of up to five devices. Power supply: 4 X AA 1.5[V] batteries. IP 54 protection rating. Up to 30 m range. ENTRAcode+ is a wireless device that does not require any wiring and is designed for surface mounting. OPTIONAL ACCESSORIES FOR THE SPARK AUTOMATIC OPERATING UNITS 2-channel device which lets you control both your drive units and radio receivers. Communication between the transmitter and the receiver occurs wirelessly, so the device can be mounted in any place. The wall-mounted transmitter has a feedback function that informs the user about the position of the door using a LED. 2CH WALL-MOUNTED TRANSMITTER ENTRAcode+ CODE KEYPAD The RDC Vision+ control unit offers exceptional convenience and safety, both during operation and throughout installation and configuration. System components: tubular motor, central control unit with a built-in radio receiver, two four-channel remote transmitters, safety edge, and spiral cable with a cable box. The trans- mitter can be used for remote control only when the safety edge is used. RDC Vision+ CENTRAL CONTROL UNIT The transmitter makes it possible to control the operation of several drive units. The DART Vibe transmitter has a feedback function in the form of vibration, which is a confirmation that the signal from the transmitter was received. DART/ DART VIBE REMOTE CONTROL TRANSMITTER Prevent uncontrolled door leaf movement when an obstacle is present within the clear passage. PHOTOCELLS 180 It makes it possible to control other drive units with the DART and DART Vibe transmitters, and the wall-mounted transmitter. The radio receiver is a two-channel device op- erating at the frequency of 868 MHz, making it possible to program up to 40 transmitters. WIŚNIOWSKI 868 RADIO RECEIVER8 | ROLLER GARAGE DOORS BR-77s | BR-77E TECHNICAL DATA SHEET ROLLER GARAGE DOORS BR-77s | BR-77E AUTOMATIC OPERATING UNIT KITS Automatic operating units fitted in WIŚNIOWSKI doors are configured for continuous reliable operation. We use only proven drive and control units that ensure the highest comfort of use and many years of operation. Kit type TotmannAutomatikAutomatik Design Tubular motor with integrated limit switches and an emergency opening function. Control via an indoor push- button switch and outdoor key switch. Equipped with a mechanical brake. Tubular motor with integrated limit switches and an emergency opening function. Rollixo SMART io central control unit with a wireless 3CH io wall-mounted transmitter included. In- cludes two Pulsar io 4-channel remote transmitters. Mechanical brake with a safety switch. Optical sensors with a spiral cable and a cable box. Tubular motor with integrated limit switches and an emergency opening function. RDC Vision+ central control unit with two DART 4-channel remote transmitters. Mechanical brake with a safety switch. Optical sensors with a spiral cable and a cable box. Technical da ta Main power supply230 [V]; 50 [Hz]230 [V]; 50-60 [Hz]220-240 [V]; 50-60 Hz Motor supply230 [V]; 50 [Hz]230 [V]; 50 [Hz]230 [V]; 50 Hz Limit switchmechanicalmechanicalmechanical Central control unitnoRollixo SMART ioRDC Vision+ Emergency openingcrankcrankcrank Motor power240 - 400 [W]240 - 400 [W]240 - 400 [W] Torque50 - 120 [Nm]50 - 120 [Nm]50 - 120 [Nm] Func tionalit y Obstacle detectionnoyes, optical safety edgeyes, optical safety edge Automatic closingnoyesyes Safety brakenoyesyes Signal lightnoyesyes Information about the safety device status noyesyes Cycle counternonoyes Expandabilit y Signal lightnoyes / 24 [V]; 4 [W]yes, 230 [V]; max. 40 [W] Photocellsnoyesyes External antennanoyesno External key switchnoyesyes External radio receivernoyesyes Chain hoist, emergency opening nononoROLLER GARAGE DOORS BR-77s | BR-77E | 9 TECHNICAL DATA SHEET ROLLER GARAGE DOORS BR-77s | BR-77E Kit type TotmannAutomatik Design GfA SIK drive unit with the TS 959 central control unit: up (with impulse maintenance) – stop – down (without im- pulse maintenance), 16 [A] cable with a plug, emergency opening with a crank. GfA SIK drive unit with the TS 970 central control unit: up – stop – down (with impulse maintenance), 16 [A] cable with a plug, optical sensors with a spiral cable and a cable box, emergency opening with a crank. Technical da ta Main power supply3 x 400 [V]; 50 [Hz]3 x 400 [V]; 50 [Hz] Motor supply3 x 400 [V]; 50 [Hz]3 x 400 [V]; 50 [Hz] Limit switchmechanicalmechanical Central control unitTS 959TS 970 Emergency openingcrankcrank Motor power400 [W]400 [W] Torque250 [Nm]250 [Nm] Func tionalit y Obstacle detectionnoyes, optical safety edge Automatic closingnoyes Safety brakenono Signal lightnoyes Information about the safety device status yesyes Cycle counteryesyes Expandabilit y Signal lightyesyes Photocellsnoyes External antennanono External key switchyesyes External radio receivernoyes Chain hoist, emergency opening yesyesNext >